7.1 Measuring Options
WARNING: This page does not describe the selected car, but rather 228 other vehicles, including the 2013 BMW X6, 2012 BMW X6, 2012 BMW 750i, 2012 BMW 750Li, and 2011 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
An overview of all measuring options and values (VA = front axle, HA = rear axle) is shown below.
MEASURING OPTIONS SPECIFICATIONS
| Measuring options | Measuring accuracy | In measuring range | Total measuring range |
|---|---|---|---|
| Total wheel toe (VA + HA) | +/- 2' | +/-2° | +/-18° |
| Single wheel toe (VA + HA) | +/-2' | +/-2° | +/-9° |
| Camber (VA + HA) | +/-1' | +/-3° | +/-10° |
| Wheel displacement (VA) | +/-2' | +/-2° | +/-9° |
| Geometrical drive axis | +/-2' | +/-2° | +/-9° |
| Castor | +/-4' | +/-18° | +/-22° |
| Kingpin inclination | +/-4' | +/-18° | +/-22° |
| Toe-differential angle | +/-4' | +/-20° | +/-20° |
| Maximum steering angle (VA) | +/-4' | +/-60° | +/-300° |
| Maximum steering angle (HA) | +/-4' | +/-9° | +/-9° |
| Castor correction range | +/-4' | +/-7° | +/-10° |
NOTE:
The measuring accuracy details only apply when using the precision rotating and sliding plates as well as the BMW quick-acting clamps.