LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1030 (Wheel And Tires - Service Information) >> Kinematic Diagnosis System And Environment >> 4. Workstation >> 4.4 Levelling The Measuring Station

4.4 Levelling The Measuring Station

WARNING: This page does not describe the selected car, but rather 228 other vehicles, including the 2013 BMW X6, 2012 BMW X6, 2012 BMW 750i, 2012 BMW 750Li, and 2011 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.

The manufacturers of the BMW KDS (Beissbarth/Bosch) are able to measure the measuring area to the required accuracy using levelling devices. Any "normal" water level is not suitable for this. Lifting platforms must be levelled under load so that the uneven deflection in the travel rails is taken into account.

IMPORTANT: Adjustment work for the lifting platform concerned must be executed by a specialist (manufacturer's after-sales service).
scientia non olet · About LEMON Manuals