LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1030 (Wheel And Tires - Service Information) >> Kinematic Diagnosis System And Environment >> 11. Updating The Software/SETPOINT Data >> 11.2 Procedure (Beissbarth)

11.2 Procedure (Beissbarth)

WARNING: This page does not describe the selected car, but rather 228 other vehicles, including the 2013 BMW X6, 2012 BMW X6, 2012 BMW 750i, 2012 BMW 750Li, and 2011 BMW X6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Go to the "Administration" screen
  2. Select the KDS button
  3. Select Beissbarth
  4. Insert "Diskette 1" on request and confirm with "OK" (program diskette 1 of 2 is created, label it)
  5. Insert "Diskette 2" on request and confirm with "OK" (program diskette 2 of 2 is created, label it)
  6. Insert "Diskette 3" on request and confirm with "OK" (setpoint data diskette 1 of 3 is created, label it)
  7. Insert "Diskette 4" on request and confirm with "OK" (setpoint data diskette 2 of 3 is created, label it)
  8. Insert "Diskette 5" on request and confirm with "OK" (setpoint data diskette 3 of 3 is created, label it)
  9. Perform update and/or setpoint data on the KDS in the usual manner with the diskettes which have just been created.
scientia non olet · About LEMON Manuals