63 13 200 Removing And Installing/Replacing Front Left Or Right Side Repeaters

Necessary preliminary tasks:

WARNING: Follow instructions for HANDLING LIGHT BULBS (EXTERIOR LIGHTS) .

Slide trim with auxiliary direction indicator (1) forwards and remove in direction of arrow from side panel.

Installation:

Make sure trim with auxiliary direction indicator (1) is correctly engaged on side panel.

Fig 1: Sliding Trim With Auxiliary Direction Indicator Forward

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection (1).

Unclip auxiliary direction indicator from trim (2) and remove.

Installation:

Make sure auxiliary direction indicator is correctly engaged on trim (2).

Replacement:

If necessary, replace BULB .

Fig 2: Identifying Auxiliary Direction Indicator With Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.