35 40 001 Removing and installing/replacing accelerator pedal module
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 MINI Cooper, 2007 MINI Cooper, 2006 MINI Cooper, 2005 MINI Cooper, and 2004 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
When replacing control unit:
- Observe programming/coding. Refer to DIAGNOSIS PROGRAMMING/CODING .
Press retaining tab (1) downwards and slide accelerator pedal module (2) in direction of arrow off adapter plate and remove.
Disconnect plug connection.
IMPORTANT:
The adapter plate must be replaced if an accelerator pedal is removed. Refer to 35 40 503 REPLACING ADAPTER PLATE .