64 11 800 Removing and installing/replacing servodrive for flap control gear (IHKA)
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 MINI Cooper, 2007 MINI Cooper, 2006 MINI Cooper, 2005 MINI Cooper, and 2004 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
Necessary Preliminary Tasks:
- Remove trim between front center console and instrument panel. Refer to 51 16 198 REMOVING/INSTALLING OR REPLACING TRIM BETWEEN FRONT CENTER CONSOLE AND INSTRUMENT PANEL .
- Remove radio receiver. Refer to 65 11 030 REMOVING AND INSTALLING/REPLACING RADIO RECEIVER (BUILT-IN UNIT) .
- Remove heater controls. Refer to 64 11 333 REMOVING AND INSTALLING/REPLACING HEATER CONTROLS (IHR AND IHKR) AND/OR 64 11 334 REMOVING AND INSTALLING/REPLACING HEATER CONTROLS (IHKA) .
- Release switch block on instrument panel. Refer to 61 31 059 REMOVING AND INSTALLING/REPLACING SWITCH BLOCK IN INSTRUMENT PANEL .
Unfasten plug connection (1) and disconnect.
Release screws (2) and remove servodrive for flap control gear.