LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 760 (Heating And Air Conditioning - Repair - Cooper (R50) , Cooper S (R53) & Convertible (R52)) >> Condenser And Dryer With Lines >> 64 53 510 Removing and installing / replacing drier bottle for air conditioner

64 53 510 Removing and installing / replacing drier bottle for air conditioner

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 MINI Cooper, 2007 MINI Cooper, 2006 MINI Cooper, 2005 MINI Cooper, and 2004 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

A/C system is drawn off. Refer to 64 50 009 DRAWING OFF, EVACUATING AND FILLING A/C SYSTEM (R 134A) .

Follow instructions on replacing drier bottle. Refer to 64 53 ... NOTES ON REPLACING DRIER BOTTLE OR DRIER INSERT .

Release screw (1).

Release screws (2).

Release drier bottle (3), tightening torque, refer to 64 53 3AZ in HEATING AND AIR CONDITIONING - TIGHTENING TORQUES - COOPER (1.6L) R50/W10 .

Remove drier bottle together with bracket.

Installation: 

Replace O-ring of drier bottle.

Fig 1: Locating Drier Bottle
G03307227Courtesy of BMW OF NORTH AMERICA, INC.