61 61 081 Replacing left or right windscreen wiper arm

Special tools required:

Pull off protective cap (1).

Fig 1: Removing Protective Cap

Courtesy of BMW OF NORTH AMERICA, INC.

Retaining lugs (1) and fasteners (2) of protective cap (3) must not be damaged.

Fig 2: Identifying Retaining Lugs And Fasteners Of Protective Cap

Courtesy of BMW OF NORTH AMERICA, INC.

Unscrew nut (1).

Installation note:

Tightening torque 61 61 1AZ .

Fig 3: Identifying Nut

Courtesy of BMW OF NORTH AMERICA, INC.

Detach wiper arm with special tool 61 6 130 .

Remove the WIPER BLADE .

Installation note:

Adjust the SETTING OF THE WIPER ARMS in rest position.

Fig 4: Identifying Special Tool (61 6 130)

Courtesy of BMW OF NORTH AMERICA, INC.