61 31 068 Removing and installing/replacing switch for passenger airbag deactivation
WARNING:
Read and comply with SAFETY REGULATIONS
for handling airbag modules and pyrotechnical belt pretensioners.
Incorrect handling can activate airbag and cause injury.
Necessary preliminary tasks:
- Clamp off BATTERY NEGATIVE LEAD
- Remove SIDE COVER FROM COVER FOR AIR OUTLET VENT ON RIGHT
Unlock catches (1).
Feed switch for passenger airbag deactivation (2) in direction of arrow out of cover for air outlet vent.
Installation note:
Make sure switch for front passenger airbag deactivation (2) is correctly seated on cover for air outlet vent.
Replacement: