34 41 001 Removing and installing handbrake lever

Necessary preliminary tasks

After completing tasks, ADJUST HANDBRAKE .

Release adjustment unit (1) for handbrake lever.

Fig 1: Identifying Adjustment Unit Of Handbrake Lever

Courtesy of BMW OF NORTH AMERICA, INC.

Detach both parking brake Bowden cables from balance arm.

Fig 2: Removing Parking Brake Bowden Cables From Balance Arm

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connection for handbrake check switch.

Release screws (1) and remove fastener (2).

Installation:

Tightening torque 34 41 1AZ .

Fig 3: Identifying Screws And Fastener

Courtesy of BMW OF NORTH AMERICA, INC.

Remove handbrake lever.