51-1 45 Trim panel, dashboard
TIGHTENING TORQUE SPECIFICATION - TRIM PANEL, DASHBOARD
| Type | Thread | Tightening specifications | Dimension | |
|---|---|---|---|---|
| 1AZ Instrument panel trim, screws to body | R50/R52/R53 | 48 Nm | ||
| 2AZ Lower instrument panel trim, screws | R50/R52/R53 | 8 Nm | ||
| 3AZ Dashboard support to bulkhead, screws | R55/R56/R60 | M10 | 34 Nm | |
| 4AZ Holder, support to bulkhead, screw | R55/R56 | 22 Nm | ||
| 5AZ Trim, CD changer | R55/R56/R57 | 1.7 Nm | ||
| 6AZ Retaining bracket to tunnel | R60 | 8 Nm | ||
| 7AZ Support for dashboard to frequency strut (bulkhead) | R60 | 7.5 Nm |