63 12 007 Removing and installing/replacing left or right headlight (halogen headlight)
WARNING:
Follow instructions for HANDLING LIGHT BULBS (EXTERIOR LIGHTS) .
IMPORTANT:
Read and comply with NOTES ON PROTECTION AGAINST ELECTROSTATIC DAMAGE (ESD PROTECTION)
.
Release screws (1). Tightening torque 63 12 1AZ .
Disconnect plug connection (2).
Version with headlight cleaning system:
- Pull headlight forwards slightly and detach hose connection (3) from high-pressure nozzle (4).
Remove headlight.
Fig 1: Identifying Halogen Headlight High Pressure Nozzle, Hose Connection, Plug Connections And Screws
Installation note:
- Adjust gap dimensions by means of adjusting screws (1)
- Adjust HEADLIGHTS
Replacement:
- Modify HALOGEN BULB FOR HEADLIGHT
- Modify HALOGEN BULB FOR HIGH BEAM HEADLIGHT
- Modify BULB FOR TURN INDICATOR
- If necessary, modify HIGH-PRESSURE NOZZLE of headlight cleaning system
- Modify adjusting screws.