62 10 100 Removing and installing/replacing steering column revcounter
IMPORTANT:
Read and comply with notes on protection against electrostatic damage (ESD PROTECTION)
.
Necessary preliminary tasks
- Disconnect BATTERY NEGATIVE LEAD
- Remove LOWER TRIM FROM INSTRUMENT PANEL
Disconnect plug connection (1).
Unlock plug housing catch at plug connection holder.
Detach plug housing from plug connection holder.
Release screws (1) on back of revcounter (2) and remove.
Pull revcounter (2) in opposite direction to direction of travel and remove.
Installation:
Make sure revcounter wiring harness is correctly laid.