33 32 Control Arms and Struts
WARNING: This page is about a different variant/trim than selected.
CONTROL ARMS AND STRUTS TIGHTENING TORQUES
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Control arm to trailing arm | R56 | Screw M12 x 1.5 | 100 Nm | |
| 2AZ Control arm to rear axle carrier | R56 | Screw M12 x 1.5 | 100 Nm | |
| 3AZ Control arm to rear axle carrier | R56 | Hexagon nut M12 x 1.5 | Replace nut | 100 Nm |
| 4AZ Trailing arm bearing to trailing arm | R56 | Screw M14 x 1.5 | 165 Nm | |
| 5AZ Holder, trailing arm to body | R56 | M12x1.5 screw | 100 Nm |