51 12 070 Replacing center spoiler on rear bumper trim

Necessary preliminary tasks: 

• Remove bumper trim  

Release catches (1) and remove spoiler (2).

Installation: 

Catches (1) on spoiler and bumper trim must not be damaged.

Fig 1: Identifying Catches And Spoiler

Courtesy of BMW OF NORTH AMERICA, INC.

Version with PDC: 

Modify all ultrasonic sensors.

Expand latch mechanisms (1) and remove ultrasonic sensor (2) in direction of arrow.

Fig 2: Identifying Catches And Ultrasonic Transducer

Courtesy of BMW OF NORTH AMERICA, INC.