51 45 Trim, instrument panel
WARNING: This page is about a different variant/trim than selected.
TRIM, INSTRUMENT PANEL TIGHTENING TORQUES
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Instrument panel trim, screws to body | R50 / R52 / R53 | 48 Nm | ||
| 2AZ Lower instrument panel trim, screws | R50 / R52 / R53 | 8 Nm | ||
| 3AZ Instrument panel carrier to bulkhead, screws | R56 | M10 | 34 Nm | |
| 4AZ Bracket, carrier to bulkhead, screw | R56 | 22 Nm |