64 52 A/C compressor
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2003 BMW 540i, 2002 BMW 540i, 2001 BMW 540i, 2000 BMW 540i, and 2000 BMW 528i. However, it is still accessible from the selected car via links, so may be relevant.
COMPRESSOR SPECIFICATION
| Application | Type | Thread | Tightening Specification | Measure |
|---|---|---|---|---|
| 1AZ Refrigerant lines to A/C compressor | E36/7 M54, E36/7 S54, E38, E39, E46, E52, E53, E60, E61, E63, E64, E65, E66, E67, E83, E85, E87, E90, E91, E92, E93 | M8 | 20 Nm | |
| 2AZ Filler plug, A/C compressor | E36, E38, E39, E46, E52, E53, E60, E61, E63, E64, E65, E66, E67, E83, E85, E87, E90, E91, E92, E93 | 30 ± 1 Nm | ||
| 3AZ A/C compressor to carrier | M67TU, M54, N62, S85, N54 | M8 | 21 Nm | |
| N45, N46, M47T2, M57TU, M57T2 | M8 | 19 Nm | ||
| N52K | M8 x 87 | Replace aluminium screw/bolt | ||
| Jointing torque | 10 Nm | |||
| Torque angle | 180 ± 15° | |||
| N52K | M8 x 52 | Replace aluminium screw/bolt | ||
| Jointing torque | 10 Nm | |||
| Torque angle | 90 ± 15° | |||
| N52 | M8 x 87 | Replace aluminium screw/bolt | ||
| Jointing torque | 10 Nm | |||
| Torque angle | 180 ± 15° | |||
| N53 | M8 x 52 | Replace aluminium screw/bolt | ||
| Jointing torque | 10 Nm | |||
| Torque angle | 90 ± 15° | |||
| N53 | M8 x 87 | Replace aluminium screw/bolt | ||
| Jointing torque | 10 Nm | |||
| Torque angle | 180 ± 15° | |||
| E85 S54, E86 S54 | 20 Nm | |||
| 4AZ Belt pulley / hub to A/C compressor | M47T2 | 35 ± 5 Nm | ||
| 5AZ Bracket, A/C compressor to lower crankcase | N54 | 19 Nm | ||
| 6AZ Cable holder to A/C compressor | M47T2 | 3 Nm |