Removal & Installation
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 MINI Cooper, 2007 MINI Cooper, 2006 MINI Cooper, 2005 MINI Cooper, and 2004 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
Remove center console. See CENTER CONSOLE. Set steering to "top" position. Remove rubber cover (1) for ignition switch. Unfasten screws (2). Release retaining clips (arrowed) from cover. Remove trim. During installation, make sure that the lower cover is aligned correctly with the upper cover. See Fig 1 .