63 12 007 Removing and installing/replacing left or right headlight (halogen headlight)
WARNING:
Follow instructions for handling light bulbs (exterior lights) .
IMPORTANT:
Read and comply with notes on protection against electrostatic damage (ESD protection).
See 61 35... NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE)
.
Release screws (1). Tightening torque 63 12 1AZ.
Disconnect plug connection (2).
Version with headlight washer system:
- Pull headlight forwards slightly and detach hose connection (3) from high-pressure nozzle (4).
Remove headlight.
Installation:
- Adjust gap dimensions by means of adjusting screws (1)
- Adjust headlight
Replacement:
- Modify halogen bulb for headlight .
- Modify halogen bulb for high-beam headlight .
- Modify bulb for direction indicator .
- If necessary, modify high-pressure nozzle of headlight washer system . See 61 71 015 REMOVING AND INSTALLING/REPLACING A SPRAY NOZZLE IN WINDSCREEN WASHER SYSTEM .
- Modify adjusting screws