41 33 695 Removing And Installing Lock Bridge

Necessary preliminary tasks: 

• Loosen CABLE FOR ENGINE COMPARTMENT LOCKS at coupling.
• Loosen screw connections for headlights. See HALOGEN HEADLIGHTS or XENON HEADLIGHTS .
• Loosen screw connections for engine compartment lock. See LEFT SIDE and RIGHT SIDE .
• Loosen the top of the CENTRE ORNAMENTAL GRILLE

Release screws (1).

Tightening torque 51 11 7AZ

Unfasten screws (2 and 3).

Fig 1: Identifying Lock Bridge Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Release clip (1).

Release screws (2).

Tightening torque 51 11 7AZ

Release screws (3) and feed out lock bridge (4) towards front.

Fig 2: Identifying Lock Bridge Clip And Screws

Courtesy of BMW OF NORTH AMERICA, INC.