52 13 Front seats
TIGHTENING TORQUES SPECIFICATION - FRONT SEATS
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Seat to floor plate | R50 / R52 / R53 / R55 / R56 | M8 x 40 | Apply Loctite 270 | 35 Nm |
| 2AZ Handle for tilt adjustment and handle for Easy Entry | R50 / R52 / R53 | 6 Nm | ||
| 3AZ Backrest frame to seat mechanism | R50 / R52 / R53 | Apply Loctite 270 | 45 Nm | |
| R55 / R56 | Apply Loctite 270 | 38±4 Nm | ||
| 4AZ Bearing for lumbar handwheel | R50 / R52 / R53 / R55 / R56 | 1.5 Nm | ||
| 5AZ Release handle for backrest release | R55 / R56 | 1.5 Nm | ||
| 6AZ Nut for torsion spring | R55 / R56 | M10 | Self-locking | 31 ±4 Nm |
| 7AZ Actuating unit for backrest release | R55 / R56 | M5 x 12 | 3.6 ± 0.5 Nm | |
| 8AZ Seat height adjustment | R55 / R56 | M5 x 12 | 5.5 ± 0.5 Nm |