00 00 M16 and M16x1.5 - maximum tightening torques acc. to BMW GS 90003-2
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 MINI Cooper, 2007 MINI Cooper, 2006 MINI Cooper, 2005 MINI Cooper, and 2004 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
M16 AND M16X1.5 - TIGHTENING TORQUES - COOPER (1.6L) R50/W10
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| Scope of applicability of tightening torques, refer to EXCERPT FROM COMPANY STANDARD BMW GS 90003-2 Surface colour / | (surface coating) | |||
| M16 thread | yellow (ZN) | M16 8.8 | 200 Nm | |
| silver (ZNS) | M16 8.8 | 160 Nm | ||
| yellow (ZN) | M16 10.9 | 280 Nm | ||
| silver (ZNS) | M16 10.9 | 235 Nm | ||
| yellow (ZN) | M16 12.9 | 340 Nm | ||
| silver (ZNS) | M16 12.9 | 260 Nm | ||
| M16x1.5 thread | yellow (ZN) | M16 x 1.5 8.8 | 216 Nm | |
| silver (ZNS) | M16 x 1.5 8.8 | 170 Nm | ||
| yellow (ZN) | M16 x 1.5 10.9 | 303 Nm | ||
| silver (ZNS) | M16 x 1.5 10.9 | 250 Nm | ||
| yellow (ZN) | M16 x 1.5 12.9 | 364 Nm | ||
| silver (ZNS) | M16 x 1.5 12.9 | 275 Nm |