51 43 201 Removing And Installing/Replacing Panel For Roof Pillar At Front (A-Pillar), Left Or Right

WARNING: Vehicles with head airbags:
Read and comply with safety regulations for working on vehicles with airbag systems.

IMPORTANT: Do not use any sharp-edged tools to remove the trim (risk of damage to head airbag).

Lever out protective cap (1) and release screw underneath.

Tightening torque: 2 Nm

Release panel (3) from clips (2) and remove towards inside.

Installation:

Make sure door seal (4) is correctly seated.

Fig 1: Identifying Panel, Protective Cap, Clips And Door Seal

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Clips (2) and guides (3) on panel (1) must not be damaged.

Replacement:

Modify TWEETER (4).

Fig 2: Identifying Clips And Guides On Panel

Courtesy of BMW OF NORTH AMERICA, INC.