51 23 110 Removing and installing/replacing left engine hood/bonnet lock
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 MINI Cooper, 2007 MINI Cooper, 2006 MINI Cooper, 2005 MINI Cooper, and 2004 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
Remove screws (1).
Release outer sleeve of Bowden cable from lock (2).
Remove Bowden cable from lock (3).
Remove lock.
Installation:
Adjust hood/bonnet lock. Refer to 51 23 004 ADJUSTING ENGINE HOOD/BONNET LOCK .