32 21 Steering Arms
WARNING: This page is about a different variant/trim than selected.
STEERING ARMS TIGHTENING TORQUES
| |
Type |
Thread |
Tightening specification |
Measure |
| 1AZ Tie rod end to swivel bearing |
R56 |
M12x1.5 |
Replace nut |
65 Nm |
| 2AZ Clamping screw, tie rod |
R56 |
|
|
30 Nm |
| 3AZ Axial link to rack |
R56 |
|
|
77 Nm |