63 12 007 Removing And Installing/Replacing Left Or Right Headlight (Halogen Headlight)

Release screws (1).

Disconnect plug connection (2).

Version with headlight washer system: 

• Pull headlight forwards slightly and detach hose connection (3) from high-pressure nozzle (4).

Remove headlight.

Fig 1: Identifying Screws And High-Pressure Nozzle

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

• Adjust Gap Dimensions by means of adjusting screws (1)
  Fig 2: Gap Dimensions

  Courtesy of BMW OF NORTH AMERICA, INC.
• Adjust HEADLIGHTS 
  Fig 3: Identifying Adjusting Screws

  Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: 

• Retrofit HALOGEN BULB FOR HEADLIGHT 
• Retrofit HALOGEN BULB FOR HIGH-BEAM HEADLIGHT 
• Modify BULB FOR TURN INDICATOR 
• If necessary, modify HIGH-PRESSURE NOZZLE of headlight washer system
• Modify adjusting screws