LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2009 >> Cooper Works Clubman >> Repair and Diagnosis >> External Pages >> Different car >> Section 3398 (Body Equipment - Repair) >> Hood Latch, Locks >> 51 23 265 Removing and installing/replacing left or right gas pressure spring for engine compartment lid

51 23 265 Removing and installing/replacing left or right gas pressure spring for engine compartment lid

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
WARNING: Danger of injury and damage!
For the following tasks, you must take the appropriate measures to support the engine compartment lid.
As an alternative, you can enlist the help of a second person to hold the engine compartment lid.

Make a written record of the installation position of the gas pressure spring(s) before removing.

Carry out BALL SOCKET REMOVAL  at both ends (1) of gas pressure spring (2).

Fig 1: Identifying Ball Socket Ends And Gas Pressure Spring
G08471967Courtesy of BMW OF NORTH AMERICA, INC.