51 76 030 Removing and installing/replacing rear engine hood/bonnet seal

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2016 BMW 760Li, 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, and 2012 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.

Up to 08/2008:

Open and detach left and right service flaps (1).

From 09/2008:

REMOVE SERVICE FLAPS (1)

Feed out seal (2) and lay to one side.

NOTE: If necessary, detach front engine compartment lid seal (3) in operating range.

Fig 1: Removing Front Engine Compartment Lid Seal

Courtesy of BMW OF NORTH AMERICA, INC.