11 51 000 Removing and installing/replacing water pump (N14)
WARNING:
Danger of scalding!
Only perform these tasks on an engine that has cooled down.
Only perform these tasks on an engine that has cooled down.
Recycling:
Catch and dispose of drained coolant.
Observe country-specific waste-disposal regulations.
Necessary preliminary tasks:
- Remove friction gear .
Release screws (1).
Installation:
Replace seal.
Clean sealing surfaces.
Assemble engine.
Vent cooling system and check for leaks. See VENTING COOLING SYSTEM AND CHECKING FOR WATER LEAKS .