22 11 Engine Suspension
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 MINI Cooper, 2007 MINI Cooper, 2006 MINI Cooper, 2005 MINI Cooper, and 2004 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE SUSPENSION - TIGHTENING TORQUES - (1AZ - 11AZ)
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Engine support bracket to engine mount | R50 / R52 / R53 | M12x1.5 - 8 | 68 N.m. | |
| 2AZ Engine support bracket to engine / adapter plate | R50 / R52 / R53 | M12x93 - 8.8 | 66 N.m. | |
| R50 / R52 / R53 | M12x1.75x85 | 66 N.m. | ||
| 3AZ Engine carrier bracket mount to body | R50 / R53 | M12x1.5x30 - 8.8 | 68 N.m. | |
| 4AZ Top engine carrier bracket to engine support bracket | R50, W10 / R53 | M12x1.5x60 - 8.8 | 100 N.m. | |
| R50 / W17 | M12x1.5x70 - 8.8 | 68 N.m. | ||
| 5AZ Top engine carrier bracket to engine carrier bracket holder | R50, W10 / R53, | M12x1.5x90 - 10.9 | 100 N.m. | |
| R50 / W17 | M12x1.5x100 - 8.8 | 68 N.m. | ||
| 6AZ Engine mount to body | R50 / R52 / R53 | M10x110 - 10.9 | Replace screw | |
| Jointing torque | 56 N.m. | |||
| Torque angle | 90° +/- 15° | |||
| R50 / R52 / R53 | M12x35-8.8 | 68 N.m. | ||
| 7AZ Bottom engine carrier bracket holder to oil sump | R50 / R52 / R53 | M10x20 - 8.8 | 38 N.m. | |
| 8AZ Bottom engine carrier bracket to holder | R50 / R52 / R53 | M12x1.5x60 - 10.9 | 100 N.m. | |
| 9AZ Bottom engine carrier bracket to front axle carrier | R50 / R52 / R53 | M12x1.5x90 - 10.9 | 100 N.m. | |
| 10AZ Adapter plate to end cover | R50 / W17 | M8x50, M8x65 | 24 +/- 5 N.m. | |
| R50 / W17 | M10x55 | 55 +/- 5 N.m. | ||
| 11AZ Grounding cable to engine support bracket | R50 / R52 / R53 | M8 nut | 13.5 N.m. |