Drive Axle Shaft (Left): Installation
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 MINI Cooper, 2007 MINI Cooper, 2006 MINI Cooper, 2005 MINI Cooper, and 2004 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
Replace collar nut. Secure collar nut after tightening by peening on flat area. See TORQUE SPECIFICATIONS . Replace self-locking nuts. Replace circlip. See Figure . Depress Special Tool (24 8 120) on shaft seal. Ensure tool fits over sealing ring lip so that sealing ring is protected when drive shaft is inserted. Insert drive shaft in seal and remove special tool by pulling handle. See Fig 1 . Reassemble drive shaft. Push drive shaft over resistance of snap ring. Drive shaft must snap audibly into place. Add transmission oil and check for leaks.