32 11 100 Replacing gaiter for steering box on left or right

IMPORTANT: The steering box must be replaced if the polished surface of the rack is damaged (e.g. corrosion)!

Necessary preliminary tasks:

Clean track rod.

Release EAR CLIP (1).

Installation note:

Clean rack and check surface for damage (e.g. by corrosion).

Grease rack (grease: Calypsol SF-3-131-TMM 3 ; BMW part number 83 23 9 407 857).

Release ear clip (1).

Fig 1: Identifying Ear Clip

Courtesy of BMW OF NORTH AMERICA, INC.

Release band clamp (1) and detach gaiter (2) from track rod.

Fig 2: Removing Gaiter From Track Rod

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

Clean tie rod and apply grease to taper.

Grease track rod where gaiter (1) is fitted with grease "Renolit JP 1619, BMW part number 6 778 561".

NOTE:

This ensures that the gaiter is not rotated when the tie rod is rotated.

Fig 3: Greasing Track Rod Where Gaiter Is Filled With Grease

Courtesy of BMW OF NORTH AMERICA, INC.

After installation: