64 11 861 Replacing servodrive for temperature control (IHKA)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 MINI Cooper, 2007 MINI Cooper, 2006 MINI Cooper, 2005 MINI Cooper, and 2004 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.

Necessary Preliminary Tasks:

Remove right storage compartment, refer to 51 16 390 REMOVING AND INSTALLING/REPLACING INSTRUMENT PANEL TRIM STORAGE TRAY (PASSENGER SIDE) , or glovebox, refer to 51 16 360 REMOVING AND INSTALLING RIGHT GLOVEBOX .

Unlock and disconnect plug connection (1) of servodrive for temperature control (2).

Fig 1: Identifying Plug Connection Of Servodrive For Temperature Control

G03307185

Courtesy of BMW OF NORTH AMERICA, INC.

Detach control lever (1) in direction of arrow.

2) Drag link.

Installation:

Ensure correct seating.

Fig 2: Locating Drag Link

G03307186

Courtesy of BMW OF NORTH AMERICA, INC.

Slacken cable (1).

Disengage drag link (2) in direction of arrow.

Release catch (4).

Disengage servodrive for temperature control with holder (3) and linkage towards bottom front.

Installation:

Ensure correct seating.

Fig 3: Disengaging Servodrive

G03307187

Courtesy of BMW OF NORTH AMERICA, INC.

Separate drag link (1) from control lever (2).

Release screws (4).

Remove servodrive for temperature control (5) from holder (3).

Installation:

Ensure correct seating.

Fig 4: View Of Drag Link And Control Lever

G03307188

Courtesy of BMW OF NORTH AMERICA, INC.