31 35 000 Removing and installing/replacing front anti-roll bar

Necessary preliminary tasks:

Release nut (1); if necessary, grip dihedron (2) or hexagon socket.

Tightening torque 31 35 1AZ

Installation note:

Replace self-locking nut.

Fig 1: Release Nut (1); If Necessary, Grip Dihedron (2) Or Hexagon Socket

Courtesy of BMW OF NORTH AMERICA, INC.

Release left and right screws (1).

Tightening torque 31 35 3AZ

Remove anti-roll bar (2) from control arm bracket.

Installation note:

Replace RUBBER MOUNT for anti-roll bar.

Fig 2: Identifying Anti-Roll Bar

Courtesy of BMW OF NORTH AMERICA, INC.