34 11 Front Brake R56
WARNING: This page is about a different variant/trim than selected.
FRONT BRAKE R56 - TECHNICAL DATA
| Different thicknesses on brake linings | max. mm | 0.01 |
| Surface roughness of braking surfaces (precision-turned) | Ra μ | 0.5... 3.5 |
| Brake disc diameter Models: ONE, COOPER |
mm | 280 |
| Brake disc diameter Models: COOPER S |
mm | 294 |
| Wear warning from residual lining thickness | mm | 3.0 |
| Brake disk minimum thickness (MIN TH) stamped on brake disk body Models: ONE, COOPER, COOPER S |
mm | 20.4 |
| Max. machining limit per friction ring side | mm | 0.8 |