34 21 Rear Brake
WARNING: This page is about a different variant/trim than selected.
REAR BRAKE TIGHTENING TORQUES
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Brake disc to wheel hub (contact faces between brake disc and wheel hub clean and grease-free) | R56 | Torx screw M10 x 13 | 27 Nm | |
| 2AZ Brake caliper to wheel carrier | R56 | M10 | 65 Nm | |
| 3AZ Guide screws (hexagon screw) | R56 | wrench size 13 mm | 35 ± 3 Nm |