62 10 100 Removing and installing/replacing steering column rev counter

IMPORTANT: Read and comply with NOTES ON ESD PROTECTION (ELECTRO STATIC DISCHARGE) .

Necessary preliminary tasks:

Disconnect plug connection (1).

Unlock plug housing catch at plug connection holder.

Detach plug housing from plug connection holder.

Fig 1: Identifying Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) on back of rev counter (2) and remove.

Pull rev counter (2) in opposite direction to direction of travel and remove.

Installation:

Make sure rev counter wiring harness is correctly laid.

Fig 2: Identifying Screws And Rev Counter

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement: