13 72 001 Replacing air cleaner element (N14)

WARNING: This page is about a different variant/trim than selected.

Release screws.

Tightening torque 13 71 3AZ

With vehicles that have a hot film air mass meter:

Release clamp (1) and pull the lid (2) off the air hose and remove.

Fig 1: Clamp, Air Hose Cover And Retaining Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Remove air cleaner element (1) from intake filter housing.

Installation note:

Clean intake filter housing.

Fig 2: Intake Filter Housing Air Cleaner Element

Courtesy of BMW OF NORTH AMERICA, INC.