61 67 083 Removing And Installing / Replacing Left Or Right High-Pressure Nozzle Of Headlight Washer System

WARNING: This page is about a different variant/trim than selected.

Necessary preliminary tasks:

Release screws (1).

Remove high-pressure nozzle (2) in direction of arrow.

Installation:

Make sure guide (3) is correctly seated in lug (4).

Fig 1: Removing High-Pressure Nozzle

Courtesy of BMW OF NORTH AMERICA, INC.

Press holder (1) for chrome trim in direction of arrow off high-pressure nozzle.

Fig 2: Pressing Holder For Chrome Trim

Courtesy of BMW OF NORTH AMERICA, INC.