51 45 380 Removing And Installing (Replacing) Right Decorative Strip On Instrument Panel

WARNING: This page is about a different variant/trim than selected.

Special tools required:

Carefully unclip decorative strip (1) with special tool 00 9 317 at retaining points (2) and remove.

Fig 1: Removing Decorative Strip

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Make sure pins (1) are correctly seated on decorative strip.

If necessary, replace faulty retainers (2).

Fig 2: Identifying Pins And Retainers

Courtesy of BMW OF NORTH AMERICA, INC.