51 12 156 Removing and installing rear bumper trim

Necessary preliminary tasks: 

• Remove trim on wheel arch   from bumper trim

Release screws (1) on both sides.

Release expander rivet (2) on both sides.

Fig 1: Identifying Screws And Expander Rivet

Courtesy of BMW OF NORTH AMERICA, INC.

Release bolts (1).

Pull off bumper trim slightly towards rear with aid of a 2nd person.

Disconnect all plug connections.

Remove bumper trim.

Fig 2: Identifying Bolts

Courtesy of BMW OF NORTH AMERICA, INC.