51 45 050 Removing and installing/replacing instrument panel upper section trim
Necessary preliminary tasks:
- Disconnect battery negative lead . See 12 00... INSTRUCTIONS FOR DISCONNECTING AND CONNECTING BATTERY .
- Remove cover for instruments .
- Remove cover for air outlet vent .
- Remove CD changer/storage compartment .
- Remove SOLAR SENSOR .
Release screws (1).
Release screws (1).
Release screws (1).
Unfasten screws (2).
Tightening torque 72 12 7AZ.
Disconnect plug connection (3).
Installation:
Insert centering pins of instrument panel upper section correctly into locators (1).
Connect cable for solar sensor with thread and pass through instrument panel opening.