51 13... Decal stripes on engine hood/bonnet

NOTE: Notes and information on sticking film/foil are an essential part of these instructions and must be followed without fail.
Stick on decal stripes using the wet bonding procedure.

Decal stripe position:

Mark centerline (1) of hood/bonnet at rear between spray nozzles and at front below MINI emblem.

Mark dimensions (A and B) on hood/bonnet.

COOPER/ONE:

A = 300 mm

B = 210 mm

COOPER S:

A = 380 mm

B = 250 mm

Stick on decal stripes.

Fig 1: Centerline Of Hood

Courtesy of BMW OF NORTH AMERICA, INC.