LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2009 >> Cooper Clubman, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3412 (COLLISION - BODY PANEL REPAIR (F02) 760Li) >> Body Panel Repair General Information >> 41 00... Notes On Adhesive K5 >> 2-component adhesive application

2-component adhesive application

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, 2012 BMW 760Li, and 2011 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.

Read the vehicle-specific repair instructions to determine the thickness and positioning of the adhesive bead.

After applying the adhesive, check whether an adhesive component has emerged at the back of the glue cartridge. If yes, break off the bonding procedure. Clean new part. Use new glue cartridge. Contact national hotline.

Remove contamination caused by adhesive residue immediately.

Hardened adhesive can only be removed mechanically.

scientia non olet · About LEMON Manuals