18 00 Exhaust Assembly
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2008 MINI Cooper, 2007 MINI Cooper, 2006 MINI Cooper, 2005 MINI Cooper, and 2004 MINI Cooper. However, it is still accessible from the selected car via links, so may be relevant.
EXHAUST ASSEMBLY - TIGHTENING TORQUES - (1AZ - 11AZ)
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Clamp for final muffler | All | M8 | 15 N.m. | |
| 2AZ Exhaust system to exhaust manifold | W10 / W11 | M10 | Replace nuts Coat threads with copper paste | 60 N.m. |
| 3AZ Reinforcing panel to body | W10 / W11 | 14 N.m. | ||
| 4AZ Rubber mount to reinforcing panel | W10 | M6 | 9 N.m. | |
| 5AZ Vibration damper on bracket | W10 | 21 N.m. | ||
| 6AZ Holder/vibration damper to exhaust | W10 | 21 N.m. | ||
| 7AZ Exhaust mounting brackets to body | W11 | 14 N.m. | ||
| 8AZ Cover/rear muffler | W10 / W11 | 2.5 N.m. | ||
| 9AZ Exhaust system to primary catalytic converter | W17 | 43 N.m. | ||
| 10AZ Primary catalytic converter to exhaust turbocharger | W17 | Replace nuts Coat threads with copper paste | 26 N.m. | |
| 11AZ Holder to primary catalytic converter | W17 | 37 N.m. |