41 61 000 Removing And Installing Engine Hood

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2010 BMW 528xi, 2010 BMW 528i, 2009 BMW 528xi, 2009 BMW 528i, and 2008 BMW 528xi. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Support engine hood in fully opened position with suitable apparatus. Risk of injury.

NOTE: Carry over schematic representation to the relevant vehicle type.

Loosen screws (1).

Unfasten screws (2).

Remove hood lid.

Installation:

Install engine hood at screw locations to on hinge. This dispenses with the need for adjustment after installation.

Fig 1: Screws

Courtesy of BMW OF NORTH AMERICA, INC.

If this is not possible, adjust ENGINE HOOD .

Tightening torque 41 61 1AZ .