22 31 005 Removing and installing/replacing transmission support bracket

Necessary preliminary tasks:

Disconnect battery, see 12 00 ... INSTRUCTIONS FOR DISCONNECTING AND CONNECTING BATTERY
Remove intake filter housing, see 13 71 000 REMOVING AND INSTALLING INTAKE FILTER HOUSING (N12) or 13 71 000 REMOVING AND INSTALLING OR REPLACING INTAKE FILTER HOUSING (N14)
Remove control unit, see 12 14 550 REPLACING CONTROL UNIT (DME) (N12) or 12 14 550 REPLACING CONTROL UNIT (DME) (N14)
Support engine and gearbox

Release screws (1).

Push fuse box to one side.

Fig 1: Screws

G04796601

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Remove holder (2).

Fig 2: Screws And Holder

G04796602

Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1).

Tightening torque: 22 32 2AZ, see 32 TRANSMISSION SUPENSION (AUTO.)

Slacken nut (2).

Tightening torque: 22 32 3AZ, see 32 TRANSMISSION SUPENSION (AUTO.)

Remove transmission support bracket.

Fig 3: Screws And Nut

G04796603

Courtesy of BMW OF NORTH AMERICA, INC.