64 11 Heater and Controls
WARNING: This page is about a different variant/trim than selected.
HEATER AND CONTROLS - TIGHTENING TORQUES - (1AZ - 5AZ)
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Nut, guide pin, heater | R50 / R52 / R53 | M6 | 7.5 N.m. | |
| 2AZ Heater to instrument panel trim, bottom | R50 / R52 / R53 | 3 N.m. | ||
| 3AZ Heater to cross-member | R50 / R52 / R53 | 4 N.m. | ||
| 4AZ Line / A/C system to expansion valve | R50 / R52 / R53 | M6 x 20 | 7.5 N.m. | |
| 5AZ Clamping screws | R50 / R52 / R53 | 6 N.m. |