00 0 190 Cable Cabinet I, Complete

Note: With set of films and accessories - For storing adapter cables as well as measuring devices and testers.

SI number: 0 02 99 (399).

Order number: 00 0 190  .

Cable cabinet I, complete.

Consisting of:

1. = 00 0 191 Cable cabinet.
   Fig 1: Identifying 00 0 190 Cable Cabinet

   Courtesy of BMW OF NORTH AMERICA, INC.

   Note: Without contents or accessories Basis for cable cabinets I and II.

2. = 00 0 192 Set of films I.

   Note: For identifying storage locations in cable cabinet I - valid status in each case.

3. = 00 0 193 Cable holder set - H -.

   Note: For cable cabinet I only 24 guide rails each with 15 retaining straps for accommodating adapter leads.

4. = 00 0 194 Cable carrier - B -.

   Note: For accommodating engine test leads For extending cable suspensions in cable cabinets I and II.

5. = 00 0 195 Swivel board frame.

   Note: Carrier of cable suspensions in cable cabinets I and II.

6. = 00 0 196 Drawer block.

   Note: For cable cabinet I only.

7. = 00 0 197 Magnet with roller.

   Note: For improved location and spacing of swivel boards - For retrofitting in cable cabinets I and II only.

8. = 00 0 198 Compartment floor.

   Note: For cable cabinet I only.

9. = 00 0 199 Index.

   Note: For finding BMW special tools for automotive electrics in cable cabinets I and II.