To remove engine support side frame connection

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 BMW 760Li, 2014 BMW 760Li, 2013 BMW 760Li, 2012 BMW 760Li, and 2011 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.

The following new body parts are required (refer to BMW Electronic Parts Catalogue):

(1) Connection, wheel arch/entrance

Fig 1: Identifying Wheel Arch/Entrance Connection
Courtesy of BMW OF NORTH AMERICA, INC.

Open welded connections in areas (1).

Fig 2: Identifying Welded Connections Areas

G08471309

Courtesy of BMW OF NORTH AMERICA, INC.

View from below:

Open welded connections in areas (1).

Fig 3: Identifying Welded Connections Areas

G08471310

Courtesy of BMW OF NORTH AMERICA, INC.

View from below:

Open welded connections in areas (1).

Remove wheel arch/entrance connection.

Fig 4: Identifying Welded Connections Areas

G08471311

Courtesy of BMW OF NORTH AMERICA, INC.

New part preparation

Open welded connections in area (1).

Remove metal section (2).

Fig 5: Identifying Welded Connections Area And Metal Section

G08471312

Courtesy of BMW OF NORTH AMERICA, INC.